NorthStar 961 Reference Manual page 186

Chapter 8 - Creating Routes
Creating a route as
you travel
Page 8-10
Adding points to an already displayed route
1. At the CHART screen, move the cursor to the desired next
point of the displayed route, then press the CURSOR
menu key.
2. Press the STORE AS WAYPT/ROUTE key.
The STORE AS A WAYPOINT dialog box appears,
supplying a default waypoint name, and now showing the
name of the currently displayed route.
Store as a waypoint (with on-chart route) dialog box
3. If desired, use the KEYPAD to change the default
waypoint name; if not, press the ADD TO END OF ROUTE
key.
The CHART screen appears, showing the dark blue route
line with each newly added route waypoint.
Another way to create a route is simply to travel the length of
the desired route, pressing the SAVE key at each location you
want to store as a waypoint in the route. You can start this
route saving process while viewing any screen. The route
saving function makes this a very simple process.
961/962 Operations and Reference Manual, Rev. A