NorthStar 961 Reference Manual page 125

961/962 Operations and Reference Manual, Rev. A
3. If desired, to reverse the direction of the route, press the
REVERSE DIRECTION key; if not, press the GO NOW key
(or press the CANCEL key to cancel).
The CHART screen appears, showing the leg joined as
the new desired track, and inserts your present vessel
position and time as a past trip point. The JOIN LEG
dialog box appears, reminding you to press the SAVE key
when you reach the point where you join the route leg;
pressing the SAVE key there ensures that the system
saves the position in the trip where you'll join the leg.
4. Press the OK key.
Editing a route or the trip
You can edit a route or a trip by adding waypoints to the
middle of a route leg or a trip leg. This function splits a leg into
two new segments.
1. On the CHART screen, press the CURSOR PAD to select a
route leg or a trip leg at the point where you want to add
a waypoint, then press the CURSOR menu key. The
SELECTED ROUTE LEG or SELECTED TRIP LEG dialog
Chapter 4 - Understanding the Chart Screen
Selected route leg dialog box
Page 4-33