Editing A Route - NorthStar 961 Reference Manual

Editing a route

Editing a route at
the routes screen
961/962 Operations and Reference Manual, Rev. A
3. Press the SAVE AS A ROUTE key (or press CANCEL to
cancel).
The TRIP screen appears. Current navigation, if any, isn't
affected.
You can change the waypoints or the waypoint coordinates of
an existing route by using the route editing function. You can
edit a route at the ROUTES screen or at the CHART screen.
At the EDIT ROUTE screen, you can change a route in the
following ways:
• change its name
• insert waypoints at the beginning
• insert waypoints at the end
• insert waypoints within a route leg
• delete waypoints
To edit a route on the ROUTES screen:
1. Press the CURSOR PAD up or down to select the desired
route, then press the EDIT key.
The EDIT THE ROUTE dialog box appears.
Chapter 8 - Creating Routes
Page 8-17