NorthStar 961 Reference Manual page 192

Chapter 8 - Creating Routes
Saving the trip as a
route
Page 8-16
2. To copy the route in its existing direction, press the
FORWARDS key; to copy the route in a reverse direction,
press the REVERSE key.
3. If desired, use the KEYPAD to enter a new route name,
then press the EDIT ROUTE key.
The EDIT ROUTE screen appears.
4. To edit the route, follow the guidelines in "Editing a route
at the routes screen" on page 17-17., starting from the
EDIT ROUTE screen.
If, at any time, you decide to save the sequence of waypoints
in the trip, you can save and store your entire current trip as a
route. Before saving the trip, however, you may want to erase
unwanted waypoints from it; see "Erasing the trip" starting on
page 11-12.
1. At the TRIP screen, press the SAVE TRIP AS ROUTE key.
The SAVE THE TRIP AS A ROUTE dialog box appears.
2. If desired, use the KEYPAD to change the default route
name in the NAME field.
Save trip as route dialog box
961/962 Operations and Reference Manual, Rev. A