NorthStar 961 Reference Manual page 232

Chapter 10 - Waypoint and Route Navigation
Adding a selected
waypoint to the end
of the trip
Page 10-18
2. Press the CURSOR PAD up or down to highlight the
desired waypoint.
You can press the TDS,LT/LN key to view waypoint
coordinates as loran TDs.
3. Press the GO TO key.
4. Press the GO NOW key.
The STEER screen appears, and guides you to this
selected waypoint.
1. Press the WAYPTS/ ROUTES key to access the
WAYPOINTS screen.
2. Press the CURSOR PAD up or down to highlight the
desired waypoint.
3. Press the GO TO key.
961/962 Operations and Reference Manual, Rev. A
Go to waypoint dialog box