NorthStar 961 Reference Manual page 309

961/962 Operations and Reference Manual, Rev. A
1. Press the STAR key until you reach the SETUP MENU
screen, then press the CHART INVENTORY key.
2. Press the LOAD/UPDATE CHARTS key.
3. At the CHARTS IN DATABASE screen, press the LOAD
CHARTS key.
4. At the SELECT CHART SOURCE screen, press the
CURSOR PAD to highlight the CD-ROM drive, then press
the LIST CHARTS key.
5. At the CHARTS ON DISK screen, press the CURSOR PAD
to highlight the desired chart.
6. To mark a chart LOAD, press the OPTION key; to mark a
chart DON'T LOAD, press the OPTION key again.
7. Press the LOAD CHARTS key, and the LOADING CHARTS
dialog box appears. To load charts marked LOAD into the
database, press the LOAD MARKED CHARTS key (or to
cancel, press the CANCEL key). If the CD and the chart
database have duplicate file names, you'll have three
options to choose from:
>
To ensure that the chart database contains the chart(s)
with the most recent file date, press the NEWEST
VERSION key.
>
To always replace chart(s) already in the database, press
the ALWAYS OVERWRITE key.
>
To never replace chart(s) already in the database, press
the NEVER OVERWRITE key.
8. Press the desired key to start loading the charts (or press
CANCEL to return to the CHARTS ON DISK screen).
After loading, the LOADING CHARTS dialog box provides
a summary of the total number of charts loaded.
9. Press CONFIRM to go back to the CHARTS ON DISK
screen.
Chapter 13 - Customizing Setup Functions
Page 13-39