Creating New Waypoints - NorthStar 958 Operator's Manual

Creating new waypoints

Assigning a name
and description
Assigning a symbol
958 Operator's Manual, Rev. A
The small letter "S" to the right of the waypoint name tells you
that the displayed coordinates, either lat/lon or TDs, were the
ones used to originally store the waypoint.
There are two easy ways to create new waypoints:
•
graphically--by storing their positions after pointing to
them on the CHART screen
•
numerically--by entering position coordinates as lat/lon,
loran TDs, or distance and bearing on the NEW WAYPOINT
screen
To permanently store a waypoint, you must give it a name.
The name can be from one to six characters long, and must be
different from all the other waypoint names stored in the 958.
You can also enter a description of up to 16 characters on the
line below the name.
You can give the waypoint a symbol so you can easily identify
it on the CHART screen. When creating or editing waypoints,
you can choose from any one of 16 symbols, eight of which
are shown below.
ANCHOR
FUEL
Chapter 6 - Understanding the Waypoints Function
FISH FLAG
WRECK DANGER
Figure 4: Waypoint symbols
X
DOT
Page 75