Toro Reelmaster 5010-H Diagnostic Manual page 86

1. Engine
2. Muffler
1. Exhaust muffler
2. Perform the resistance and continuity tests with the start relay as described the Component Testing section
in Chapter 5 of the 5010-H Service Manual. Replace the start relay if you determine that the relay is faulty.
3. Clear the system faults from the InfoCenter. Refer to
4. Start the engine.
Figure 58
3. Operator's seat
4. Start relay
Figure 59
2. Start relay
Clearing Faults from the InfoCenter (page 21)
86
g035716
g033155