Toro Reelmaster 5010-H Diagnostic Manual page 41

Hide thumbs Also See for Reelmaster 5010-H:

Table of Contents

1. 7.5 amp fuses (3)

Test each fuse for continuity.

All 3 fuses test good. Install the fuses. Go to Step 3.

Replace any bad fuses. Install any fuses that tested good. Go to

and follow the steps listed.

Step 3: Test the main power relay.

Perform the following steps to test the main power relay:

Open the hood to gain access to the relays that are located behind the operator's seat. See

Returning the Machine to Service

Troubleshooting