1. 48 Vdc disconnect
2. Operator's seat
3.
Verify the ignition key is in the O
4.
Using a multimeter, measure the voltage across the contactor coil posts
should be approximately 0 Vdc.
1. 48V battery disconnect
2. 250A/58V fuse
3. Contactor coil posts (J24 and J25)
Figure 124
3. Main contactor
position.
FF
Figure 125
4. Main 48 Vdc contactor
5. Main contact posts (J22 and J23)
215
(Figure
125). The reading
g035727
g033200