Toro Reelmaster 5010-H Diagnostic Manual page 197

Step 3: Measure the resistance of the SV3 coil.
1. Lift and support the operator's seat.
2. Remove the 4 fasteners securing the operator's floor panel.
1. Operator's floor panel fasteners (4)
3. Remove the operator's floor panel and locate the hydraulic lift manifold. See
1. Hydraulic lift manifold
2. Operator's seat
4. Locate the SV3 solenoid on the lift manifold. See
Figure 113
2. Operator's floor panel
Figure 114
3. 48V disconnect
Figure 115.
197
Figure 114.
g035763
g035725