Toro Reelmaster 5010-H Diagnostic Manual page 34

Pass The fault did not repeat. Go to
Fail The fault repeated. Go to Step 3.
Step 3: Test the temperature sender.
The temperature sender is located near the alternator, on the coolant thermostat housing attached to the
engine cylinder head (Figure
1. Temperature sender
1. Go to Preparing for Troubleshooting and/or Testing (page 22)
2. Unplug main harness connector P16 from the temperature sender
across the temperature sender
Returning the Machine to Service (page 22)
18).
Figure 18
(Figure 19).
2. Connector P16
and follow the steps listed.
(Figure
34
and follow the steps listed.
18) and measure the resistance
g032799