Toro Reelmaster 5010-H Diagnostic Manual page 42

1. Engine
2. Muffler
2. Locate the main power relay and disconnect main harness connector P04 from the relay
1. Exhaust muffler
2. Flange-head screw
3. Remove the flange-head screw that secures the relay to the mounting bracket, and remove the relay
from the machine.
4. Measure the resistance of the relay coil between terminals 85 and 86 with a multimeter
Figure 24
3. Operator's seat
4. Main power relay
Figure 25
3. Main power relay
4. Connector P04
42
g278812
(Figure 25).
g033260
(Figure 26).