Reading Faults - Toro Reelmaster 5010-H Diagnostic Manual

5. Unplug the 48 Vdc battery disconnect
6. After servicing or repairing the 48 Vdc system, apply a coat of dielectric grease to the contact surfaces of
the battery disconnect and connect the battery disconnect.
7. Lower the operator's seat and secure it with the seat latch.

Reading Faults

The InfoCenter display shows information about your machine, such as faults, the charge level of the 12
Vdc battery and the 48 Vdc battery pack, and various diagnostic messages and icons that provide current
information about the machine.
You can read faults 2 ways: on the InfoCenter display
9). This section focuses on the InfoCenter display.
(Figure 7).
Figure 7
(Figure 8) or on a PC using
20
Toro DIAG Software (page
g032653