Environmental - GE N60 Instruction Manual

2 PRODUCT DESCRIPTION
TYPICAL LINK DISTANCE
EMITTER TYPE CABLE
TYPE
820 nm LED, 62.5/125 μm
multimode
1300 nm LED, 62.5/125 μm
multimode
1300 nm ELED, 9/125 μm
single mode
1300 nm Laser, 9/125 μm
single mode
1550 nm Laser, 9/125 μm
single mode
Typical distances listed are based on the follow-
ing assumptions for system loss. As actual losses
vary from one installation to another, the distance
NOTE
covered by your system may vary.
CONNECTOR LOSSES (TOTAL OF BOTH ENDS)
ST connector 2 dB
FIBER LOSSES
820 nm multimode 3 dB/km
1300 nm multimode 1 dB/km
1300 nm single mode 0.35 dB/km
1550 nm single mode 0.25 dB/km
Splice losses: One splice every 2 km,
at 0.05 dB loss per splice.
SYSTEM MARGIN
3 dB additional loss added to calculations to compensate for
all other losses.
Compensated difference in transmitting and receiving (channel
asymmetry) channel delays using GPS satellite clock: 10 ms
AMBIENT TEMPERATURES
Storage temperature: –40 to 85°C
Operating temperature: –40 to 60°C; the LCD contrast can be
impaired at temperatures less than –
20°C
HUMIDITY
Humidity: operating up to 95% (non-condensing) at
55°C (as per IEC60068-2-30 variant 1, 6
days).
GE Multilin N60 Network Stability and Synchrophasor Measurement System
CONNECTOR TYPICAL
TYPE DISTANCE
ST 1.65 km
ST 3.8 km
ST 11.4 km
ST 64 km
ST 105 km
OTHER
Altitude: 2000 m (maximum)
Pollution degree: II
Overvoltage category: II
Ingress protection: IP20 front, IP10 back
2.3 SPECIFICATIONS

2.3.10 ENVIRONMENTAL

2-21
2