Data Logger; Phasor Measurement Unit Records - GE N60 Instruction Manual

6 ACTUAL VALUES

PATH: ACTUAL VALUES RECORDS
 DATA LOGGER

MESSAGE
The represents the time at which the oldest available samples were taken. It will be static until the log
OLDEST SAMPLE TIME
gets full, at which time it will start counting at the defined sampling rate. The
most recent samples were taken. It counts up at the defined sampling rate. If the data logger channels are defined, then
both values are static.
Refer to the 
COMMANDS CLEAR RECORDS

PATH: ACTUAL VALUES RECORDS
 PMU
 RECORDS
MESSAGE
MESSAGE
MESSAGE
The number of triggers applicable to all the phasor measurement unit recorders is indicated by the
value. The status for each of the six phasor measurement unit recorders is indicated as follows:

PATH: ACTUAL VALUES RECORDS
 PMU 1
 RECORDING
MESSAGE
MESSAGE
MESSAGE
GE Multilin N60 Network Stability and Synchrophasor Measurement System


DATA LOGGER

OLDEST SAMPLE TIME:
2000/01/14 13:45:51
NEWEST SAMPLE TIME:
2000/01/14 15:21:19
menu for clearing data logger records.

PMU RECORDS
NUMBER OF TRIGGERS:
0
 PMU 1
 RECORDING
 PMU 2
 RECORDING

 PMU 6
 RECORDING
 
PMU RECORDS PMU 1(6) RECORDING
PMU 1 FORCE TRIGGER:
Yes
PMU 1 AVAILABLE
RECORDS: 0
PMU 1 SECONDS
PER RECORD: 0.0
PMU 1 LAST CLEARED:
2005/07/14 015:40:16
represents the time the
NEWEST SAMPLE TIME

6.4.5 PHASOR MEASUREMENT UNIT RECORDS

Range: 0 to 65535 in steps of 1
See below.
See below.
See below.
Range: No, Yes
Range: 0 to 65535 in steps of 1
Range: 0 to 6553.5 in steps of 0.1
Range: date and time in format shown
6.4 RECORDS
6.4.4 DATA LOGGER
6
NUMBER OF TRIGGERS
6-27