GE N60 Instruction Manual page 391

6 ACTUAL VALUES
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The metered values for real, reactive, and apparent power, as well as power factor, are displayed in this menu. The "SRC
1" text will be replaced by whatever name was programmed by the user for the associated source (see

TEM SETUP SIGNAL SOURCES
g) ENERGY METERING

PATH: ACTUAL VALUES METERING
 ENERGY
 SRC 1
MESSAGE
MESSAGE
MESSAGE
The metered values for real and reactive energy are displayed in this menu. The "SRC 1" text will be replaced by whatever
name was programmed by the user for the associated source (see
Because energy values are accumulated, these values should be recorded and then reset immediately prior to changing
CT or VT characteristics.
h) DEMAND METERING

PATH: ACTUAL VALUES METERING
 DEMAND
 SRC 1
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
GE Multilin N60 Network Stability and Synchrophasor Measurement System
SRC 1 APPARENT PWR
c:
0.000 VA
SRC 1 POWER FACTOR
3: 1.000
SRC 1 POWER FACTOR
a:
1.000
SRC 1 POWER FACTOR
b:
1.000
SRC 1 POWER FACTOR
c:
1.000
).
 
SOURCE SRC 1 ENERGY
SRC 1 POS WATTHOUR:
0.000 Wh
SRC 1 NEG WATTHOUR:
0.000 Wh
SRC 1 POS VARHOUR:
0.000 varh
SRC 1 NEG VARHOUR:
0.000 varh
 
SOURCE SRC 1 DEMAND
SRC 1 DMD IA:
0.000 A
SRC 1 DMD IA MAX:
0.000 A
SRC 1 DMD IA DATE:
2001/07/31 16:30:07
SRC 1 DMD IB:
0.000 A
SRC 1 DMD IB MAX:
0.000 A
SRC 1 DMD IB DATE:
2001/07/31 16:30:07
SRC 1 DMD IC:
0.000 A

SETTINGS SYSTEM SETUP
6.3 METERING

SETTINGS SYS-
6
 ).
SIGNAL SOURCES
6-19