Rs232 Faceplate Port - GE N60 Instruction Manual

3 HARDWARE 3.2 WIRING
3
Figure 3–17: RTD CONNECTION

3.2.8 RS232 FACEPLATE PORT

A 9-pin RS232C serial port is located on the N60 faceplate for programming with a computer. All that is required to use this
interface is a computer running the EnerVista UR Setup software provided with the relay. Cabling for the RS232 port is
shown in the following figure for both 9-pin and 25-pin connectors.
The baud rate for this port is fixed at 19200 bps.
NOTE
Figure 3–18: RS232 FACEPLATE PORT CONNECTION
GE Multilin N60 Network Stability and Synchrophasor Measurement System 3-17