Creating An Interface Vsan; Verifying The Configuration - Cisco MDS 9000 series Configuration Manual

Using IOA Cluster with IPFC Interface
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
•
•
•
•
•
•
•
•
•
•
•
•

Creating an Interface VSAN

The following example creates an interface VSAN and configure IP address on sw-231-14 and enable IP
routing:
sw-231-14(config)# int vsan 1
sw-231-14(config-if)# ip address 10.1.1.1 255.255.255.0
sw-231-14(config-if)# no show
sw-231-14(config)# ip routing
sw-231-14(config)#
The following example create an interface VSAN and configure IP address on sw-231-19 and enable IP
routing.
sw-231-19(config)# int vsan 1
sw-231-19(config-if)# ip address 10.1.1.12 255.255.255.0
sw-231-19(config-if)# no show
sw-231-19(config)# ip routing

Verifying the Configuration

The following example verifies the configuration of sw-231-14 using show interface command.
sw-231-14# show interface vsan 1
vsan1 is up, line protocol is up
WWPN is 10:00:00:0d:ec:18:a1:05, FCID is 0xec03c0
Internet address is 10.1.1.1/24
MTU 1500 bytes, BW 1000000 Kbit
758 packets input, 110841 bytes, 0 errors, 42 multicast
651 packets output, 122577 bytes, 0 errors, 0 dropped
sw-231-14#
The following example verifies the configuration of sw-231-19 using show interface command:
sw-231-19# show interface vsan 1
vsan1 is up, line protocol is up
WWPN is 10:00:00:05:30:01:9f:09, FCID is 0xc60000
Internet address is 10.1.1.2/24
Cisco MDS 9000 Family I/O Accelerator Configuration Guide
2-10
Creating an Interface VSAN, page 2-10
Verifying the Configuration, page 2-10
Verifying the Connectivity, page 2-11
Configuring IOA Site on Switch sw-231-14, page 2-11
Configuring IOA Site on Switch sw-231-19, page 2-11
Changing the Node to Use IPFC Interface Address, page 2-11
Adding a Remote Node to the IOA Cluster, page 2-11
Adding an IOA Interface to the Switch sw-231-14, page 2-12
Adding an IOA Interface to the Switch sw-231-19, page 2-12
Verifying the Cluster Configuration, page 2-12
Verifying the IP Address, page 2-12
Verifying the IOA Interface, page 2-13
Chapter 2 Getting Started
OL-20708-01, Cisco MDS NX-OS Release 5.0(1a)