Device Status Command - Cisco D9800 Reference Manual

Device Status Command

Device Status Command
Table 89: Command Details
Command Detail
Command URL
Command Information
HTTP Methods
Access Type
Access Level
Syntax
Table 90: URI <level_1_extension> Parameters (extension to the Command URL separated by /)
URI Parameter
None
ecc
eth
power
about
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
102
Description
https://192.168.0.1/ws/v2/status/device
https://192.168.0.1/ws/v2/status/device/<level_1_extension>
https://192.168.0.1/ws/v2/status/device/about/clear
This command is used to read either all or a specific category of device
details. It may also be used to clear.
GET, POST (see Syntax row)
Read
User, Admin
One of the following:
GET "https://192.168.0.1/ws/v2/status/device"
GET "https://192.168.0.1/ws/v2/status/device/ecc"
GET "https://192.168.0.1/ws/v2/status/device/ethernet"
GET "https://192.168.0.1/ws/v2/status/device/power"
GET "https://192.168.0.1/ws/v2/status/device/about"
POST "https://192.168.0.1/ws/v2/status/device/about/clear
Description
Reads and returns current value of all device categories and
related items.
Reads and returns current value of ECC specific device items.
Reads and returns current value of ethernet specific device items.
Reads and returns current value of power status device items
for all populated card slots.
Reads and returns current value of about specific (uncategorized)
device items.
API Definitions