Setting Up Tuning / Preset - Cisco D9865 Installation And Operation Manual

Setting up Tuning / Preset

To Set Up Tuning/Preset Parameters
The Tuning/Preset menu is used to display and configure the current settings.
Proceed as follows to set up the tuning/preset:
1. From the Setup Menu screen, select Tuning / Preset and press OK.
2. The following table describes each of the available options:
Selection
Modulation Type
Downlink (Freq)
Symbol Rate
NetId
4-18
Options
DVB-S Enter the modulation scheme.
DVB-S2
Enter For C-Band:
number
Downlink Freq = LO Freq - L-Band Freq.
For Ku-Band:
Downlink Freq = LO Freq + L-Band Freq.
1.0 to 45.0 Range for DVB-S in MS/s.
1.0 to 31.0 Range for DVB-S2 in MS/s.
Enter Obtain the number from your service
number provider.
D9865 Satellite Receiver Installation and Operation Guide
Description Default
DVB-S2
12.3
30.0
1
4035197 Rev C