Front Panel Leds - Cisco D9824 Installation And Configuration Manual

Front Panel LEDs

The functions of the LEDs are described in the table below.
LED
ALARM
SIGNAL
78-4039426-01 Rev D
Signal Explanation
State/Color
Red Solid for five seconds indicates a Warning.
Red Flashing indicates an Alarm.
Green Solid indicates all of the following conditions:
all RF inputs are enabled, all inputs are

locked to a signal, and are not muted.
all routed ASI outputs are operating

without an error.
Green Flashing indicates one of the following
conditions:
difficulty with an input, route or output.

one or more RF inputs, or the ASI input

are not synchronized.
one or more ASI outputs are routed, but

muted by a fault condition.
no RF signal is present or detected, or it

is muted.
receiver is not authorized to receive the

program.
Off Off indicates all of the following conditions:
no RF input signal is available, enabled

or detected, or the input is muted.
no ASI input is present

no valid inputs are available.

About the Front Panel
33