Front Panel LEDs
The functions of the LEDs are described in the table below.
LED
ALARM
SIGNAL
Signal
Explanation
State/Color
Red
Solid for five seconds indicates a Warning.
Red
Flashing indicates an Alarm.
Green
Solid indicates all of the following conditions:
active RF inputs are enabled, locked to a
signal, and are not muted.
all outputs are operating without an
error.
Green
Flashing indicates one of the following
conditions:
difficulty with an input, route, or output.
one or more of the inputs are not
synchronized.
one or more outputs are routed, but
muted by a fault condition.
no RF signal is present or detected, or it
is muted.
receiver is not authorized to receive the
program.
Off
Off indicates all of the following conditions:
no RF input signal is available, enabled
or detected, or the input is muted.
no ASI input is present.
no valid inputs are available.
About the Front Panel
37