Viewing Adp Status - Cisco D9865 Installation And Operation Manual

Viewing ADP Status

To View the ADP Status
Proceed as follows to view the ADP Status screen.
From the Info screen, select ADP Status and press OK.
The following table describes the ADP status information displayed:
ISE UA
ADP(ENC) Passed
ADP(ENC) Total
Received
ADP(NON) Passed
4035197 Rev C
ADP Status
Indicates the ISE User Address (14 hexadecimal
characters).
Indicates the current Encrypted Addressed Data
Packet Count. This count indicates the amount of
transmitted ADP information being accurately
received and processed. Ideally, the ADP(ENC)
Passed and ADP(ENC) Total Received numbers
should be identical.
Indicates the total Encrypted Addressed Data
Packet Count. This count indicates the amount of
transmitted ADP information being accurately
received and processed. Ideally, the ADP(ENC)
Passed and ADP(ENC) Total Received numbers
should be identical.
Indicates the current Non-Encrypted Addressed
Data Packet count. This count indicates the amount
of transmitted ADP information being accurately
received and processed. Ideally, the ADP(NON)
Passed and ADP(NON) Total Received numbers
should be identical.
D9865 Satellite Receiver Installation and Operation Guide
Description
4-85