Viewing The Input And Output Status - Cisco D9854 Installation And Operation Manual

Viewing the Input and Output Status

To View the Input and Output Status
Proceed as follows to view the status pages:
1. From the user interface of the D9854, click the Status tab, and then click the
Status icon from the sub-page.
The following table describes the input, video, and CA statuses:
Input Status
Current Input
Rate (Mbps)
Scrambling Mode
Video Status
Encoding
Resolution
4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide
Status
The active input port receiving the signal (RF1, RF2,
RF3, RF4, or ASI).
Bit rate of the received input signal, in Mbps.
Indicates whether the received signal is scrambled
(Yes, No, or Unknown).
The input stream type of the received signal/
program.
Source resolution of the received signal/program.
The possible parameters are: SD480i/2997, SD480i/
3000, SD576i/2500, HD720p/5000, HD720p/5994,
HD720p/6000, HD1080i/2500, HD1080i/2997,
HD1080i/3000, Unknown, or Unsupported.
Description
5-7