Editing A Route - NorthStar 972 Quickstart Manual And Reference Manual

Editing a route

Reference section 5 — Creating waypoints and routes
76

Editing a route

display the Routes screen. If you're still
saving a route, the message
route:"
is displayed at the bottom of the
screen.
If the route becomes full (35 waypoints), you
may want to stop saving to this route and
start a second one.
You can make changes to a route graphi-
cally using the screen or you can
Chart
change it using a list of its waypoints.
You can make any of the following
changes:
change the route name
•
add new or existing waypoints to the
•
beginning, middle, or end of the route
remove waypoints from the route
•
erase the entire route
•
To edit a route:
1. Press WAYPTS/ROUTES, then press
Routes
to display the Routes screen.
To stop saving a route:
"saving to
1. Press WAYPTS/ROUTES, then press
Routes
2. Press
2. Press the cursor pad to select the route you
want to change, then press
of the route is displayed on the Edit Route
screen.
.
Stop save
and ENTER twice.
Routes screen
Edit
. The name
Northstar 972