Editing a route
Editing from the
chart screen
951/952 Operator's Manual Rev. B
While you're saving a route automatically, you can access any
of the unit's navigating functions, except for editing the route
you're presently saving. If, at any time, you're unsure whether
you're still saving a route, press the :$<3765287(6 key,
then the 5287(6 menu key to display the ROUTES screen. If
you're presently saving a route, the message SAVING TO:
appears at the bottom of the screen.
To stop saving a route as you travel:
When you want to stop saving the route, go to the ROUTES
screen directly, as described above. Press the 6723 6$9(
menu key. The unit prompts you with a question window, ask-
ing if you want to STOP SAVING TO ROUTE XXX?. Press the
(17(5 key for "YES."
You can edit a route by:
changing its name (from the CHART screen or from a way-
•
points list)
adding waypoints to the beginning (from the CHART
•
screen or from a waypoints list)
adding waypoints to the middle (from the CHART screen
•
or from a waypoints list)
adding waypoints to the end (from the CHART screen or
•
from a waypoints list)
removing waypoints (from the CHART screen or from a
•
waypoints list)
•
erasing the entire route (from a waypoints list)
To edit a route from the CHART screen:
1. Press :$<3765287(6 key and then the 5287(6 menu
key to display the ROUTES screen.
Chapter 7 - Creating Routes
Page 105