Release 7.0.0 3DB 19286 ACAA Issue 01
Provision cross connections in a mixed fiber/
microwave Ring
Figure 432
Node I to NE G: pass-through cross-connection on Node B
5. Configure a pass-through cross-connection on Node D, see
622
a. Choose the flow IDs to cross-connect from the Available VLANs list
b. Choose the Service profile: TDM2TDM or TDM2ETH
c. Choose the Clock Source, if the Service profile is TDM2ETH
d. Enter the Ring East MAC address: NE G Unicast MAC address
e. Enter the Ring West MAC address: Node A Unicast MAC address
WebEML User Manual
Figure
433.