Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
To enable an ERP Instance
1. From the ERP Instance area, select ERP instance to enable. See
2. Select ERP Enabled check box (checked).
3. Click Apply.
To disable an ERP Instance
1. From the ERP Instance area, select ERP instance to disable. See
2. Select ERP Enabled check box (unchecked).
3. Click Apply.
To modify ERP Instance parameters with ERP Instance enabled
1. From the ERP Instance area, select ERP instance to modify. See
2. Modify one or more of the following ERP Instance parameters using the
following procedure:
See
Figure 162
for the following steps:
a. Modify ERP Label in the Label field, if applicable.
b. Is Ring Node RPL Owner?
a. If yes, go to step c.
b. If no, go to step d.
c. From the Wait-to Restore Time drop-down menu, select 1 to 12 minutes, if
applicable.
d. In the Guard Timer field, enter Guard Timer duration; 10 to 2000 ms, if
applicable.
e. Click Apply.
Administer Ethernet Ring Protection (ERP)
Figure
161.
Figure
161.
Figure
161.
297
Advertisement
Table of Contents
