Configure Aux Cross Connections (Etsi Market Only); Purpose; General; Service Channels Cross-Connection In Pass-Through - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
46 Configure AUX cross connections (ETSI

46.1 Purpose

This chapter provides instructions and sequence for configuring AUX cross
connections.

46.2 General

Two types of AUX Cross-Connections can be implemented:
Note: Cross-Connection towards MPT
In this release cross-connection of Service Channels towards a radio direction with MPT is
not supported.
The operator therefore will not have the possibility to select a radio direction with MPT for
such cross-connection.
46.2.1 Service Channels Cross-connection in pass-
Independently of the presence of the Auxiliary peripheral unit, it is always possible to
cross-connect each individual radio Service Channel with a radio Service Channel of
another radio direction, without any local termination.

46.3 Procedures

This section provides the following procedures:
market only)
• Local User Service Channel Cross-Connection

• Service Channels Cross-connection in pass-through

through
Configure AUX cross connections (ETSI market
only)
403