Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
To provision Ethernet port storm control
1. Provision Ethernet Port Storm Control parameters using the following
Figure 246
Provision Core/EAS/MSS-O Ethernet port storm control
a
b
c
d
e
f
j. Click on the Apply button.
procedure. See
Figure
a. Select Ethernet Port#n to provision (Ethernet Port #1/#8).
b. Select Policy & Translation tab.
c. Provision Storm Control Ingress mode?
a. To enable, select Enabled (checked), then go to step d.
b. To disable, select Enabled (unchecked), then go to step g.
d. Select maximum Unknown Unicast Rate (Frames/s).
e. Select maximum Multicast Rate (Frames/s).
f. Select maximum Broadcast Rate (Frames/s).
g. Click on the Apply button.
246.
g
Provision Ethernet ports
22918
421