Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 625
Provisioned MPT-HLS 1+1 Vertical XPIC radio channel
23. Select an action.
24. Provision the MPT-HLS radio protection type
Note: Spare MPT-HLS transceiver must be enabled prior to provisioning MPT-HLS
transceiver protection scheme.
a. To
Provision the MPT-HLS manual transmit power level
step 38.
b. To
Provision the MPT-HLS Automatic Transmit Power Control
to step 43.
From the Equipment tab, select the MPT-HLS Dir#-Ch1 in the resource tree
area. The selected name will highlight in blue. This selection also highlights the
MPT-HLS transceiver icon in blue in the resource list area.
Configure radio parameters
(RTPC), go to
(ATPC), go
833
Advertisement
Table of Contents
