Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 616
MPT-HLC 1+1 settings tab
36. Provision MPT-HLC 1+1 spare radio channel:
Note: The Channel #1 Rx Freq (KHz) field displays the Rx RF Frequency and is the result
of the following calculation:
RX Frequency = TX Frequency +/- Shifter Frequency (based on the high or low channel
selected)
37. Select an action.
a. Enter the TX Frequency within the allowed range.
b. The Rx Freq (KHz) displays the Rx RF Frequency.
c. Click Apply.
a. To
Provision the MPT-HLC manual transmit power level
step 39.
Configure radio parameters
(RTPC), go to
817
Advertisement
Table of Contents
