Figure 53 Activate Ipv6 Stack Main Menu Bar Path - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
4. From the OSPF Area Stub Flag drop-down menu, select OSPF Area Stub Flag:
Note: When the 9500 MPR is used with other equipment, the OSPF interface parameters
of the equipment must be the same as those of the related TMN interface on the 9500 MPR.
5. Click Create.
6. Click Apply.
7. Click Close.
To activate the IPv6 stack
1. Select action.
2. From the main menu bar, select Configuration>Network Configuration>IP
Figure 53 Activate IPv6 stack main menu bar path
True or False.
a. To provide parameters for IPv6, perform
you activate IPv6 on the NE without performing pre-provisioning, default
parameters will be applied.
b. To activate the IPv6 stack, perform the following steps.
Configuration>Activate IPv6 stack. See
A warning window opens. See
Administer network configuration
Perform IPv6
Figure 53.
Figure 54.
pre-provisioning. If
143