Figure 457 Node A To Node D: Pdh-Ring Cross-Connection On Node A - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
Provision cross connections in a mixed fiber/
microwave Ring
Figure 457 Node A to Node D: PDH-Ring cross-connection on Node A
646
a. Choose the flow IDs to cross-connect from the Available VLANs list
b. Choose the Service profile: TDM2TDM or TDM2ETH
c. Choose the Clock Source, if the Service profile is TDM2ETH
d. Enter the Ring Destination MAC address: Node D Unicast MAC address
• Configure a pass-through cross-connection on Node B, see
WebEML User Manual
Figure 458.