Release 7.0.0 3DB 19286 ACAA Issue 01
Use the Provisioning Tool
Figure 701
DiffServ
932
Perform the following to complete the classification of the DiffServ Code Point to
a specific queue:
i. Change the classification on the left area by clicking on the radio buttons.
The modifications will appear in yellow.
Click on Restore to go back to the previous configuration or on Defaults to
go back to the default settings.
ii. Click on the Switch to Per Range view button (
with the current association "DiffServ to Forwarding Class Mapping", as
shown in
Figure
702.
WebEML User Manual
)to open a read-only table