Nokia 9500 MPR User Manual page 995

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
To modify a TCA threshold
1. Open the Threshold Editor.
2. From the Available Thresholds panel, select the radio PM type tab: SDH PM,
3. Select the threshold index to modify.
Note: In the SDH PM, E1/DS1 PM and Radio PM Hop threshold tabs, thresholds #1 and #4
are default thresholds. In the Radio PM Link threshold tab, thresholds #1 and #3 are default
thresholds. These default thresholds are not editable.
4. From the Editing Section panel, click Modify.
5. Update the threshold index values in the Index Editor panel.
6. From the NE Commands panel, click Apply.
7. Close the Thresholds Editor window.
To delete a TCA Threshold
1. Open the Threshold Editor.
2. From the Available Thresholds panel, select the radio PM tab: Radio PM Hop,
3. Select the Threshold index to delete.
The Thresholds Editor window opens.
PDH PM, Radio PM Hop, or Radio PM Link.
The threshold index to modify is copied to the Index Editor panel.
The threshold values are updated in the Available Thresholds panel.
The Thresholds Editor window opens.
or Radio PM Link.
Open and run performance monitoring
995