Figure 504 Ne E To Node D: Pdh-Ring Cross-Connection On Node D - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 504 NE E to Node D: PDH-Ring cross-connection on Node D
To provision a cross-connection between NE E and Node C
a. Choose the flow IDs to cross-connect from the Available VLANs list
b. Choose the Service profile: TDM2TDM or TDM2ETH
c. Choose the Clock Source, if the Service profile is TDM2ETH
d. Enter the Ring Destination MAC address: NE E Unicast MAC address
• One traffic end point is connected using Ethernet to the fiber chain, see
Figure 505.
Provision cross connections in a mixed fiber/
microwave Ring
689