Nokia 9500 MPR User Manual page 342

Release 7.0.0 3DB 19286 ACAA Issue 01
Administer synchronization
16. In the Sync Ports partition, from the Sync In port drop-down menu, select the
17. Go to step 26.
18. From the E1/DS1 Port drop-down menu, select the E1/DS1 Port.
19. Go to step 26.
20. From the Radio/MPT Port drop-down menu, select the Radio Port. The port can
21. Go to step 26.
22. From the Eth Port drop-down menu, select the Eth Port.
23. Go to step 26.
24. From the STM1 (OC-3) Port drop-down menu, select the STM1/OC-3 Port.
25. Go to step 26.
26. Provision Sync Out Port?
27. In the Sync Ports partition, from the Sync Out port drop-down menu, select the
342
Sync-In Port frequency: 1.024 MHz, 2.048 MHz, 5 MHz, or 10 MHz.
Note: If a Sync-In/Out SFP is in use, the Sync Ports area is labeled Sync In/Out
SFPs. The Sync In Port appears as NOT USED. The SFP is displayed as Sync
In Port #5, #6, #7, #8, depending on where the SFP is placed; see
be a radio channel or an L1 Radio LAG.
a. If yes, go to step 27.
b. If no, go to step 28.
Sync Out Port frequency: 1.024 MHz, 2.048 MHz, 5 MHz, or 10 MHz.
Note: If a Sync-In/Out SFP is in use, the Sync Ports area is labeled Sync In/Out
SFPs. The Sync Out Port appears as NOT USED. The SFP is displayed as Sync
Out Port #5, #6, #7, #8, depending on where the SFP is placed; see
WebEML User Manual
Figure 186.
Figure 186.