Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
Provision equipment port
49.3 Prerequisites
Core, P32E1DS1, DS3 (P2E3DS3), STM-1/OC-3 (SDHACC), EASv2, or P8ETH
cards must be enabled on the MSS shelf slots prior to provisioning equipment ports.
49.4 Procedures
This section provides the following procedures:
To provision Core SFP port
1. Select Slot #1 MSS/CORE-Main in the resource tree area. The selected name
2. Click the Settings Tab in the resource detail area. See
430
•
To provision Core SFP port
•
To provision Sync-In/Out SFP on CorEvo
•
To provision Sync-In/Out SFP on MSS-1
•
To provision an EAS card SFP port
•
To provision MSS-O SFP port
•
To provision an E1 P32E1DS1 port
•
To provision E1 node timing
•
To provision a DS1 P32E1DS1 port
•
To provision DS3 P2E3DS3 port
•
Provision SDH port
will highlight in blue. This selection also highlights the MSS/CORE card in blue
on the graphical representation of the MSS-4/MSS-8 shelf in the resource list
area.
Figure 253
for CorEvo.
WebEML User Manual
Figure 250
for Core-E or
Advertisement
Table of Contents
