Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
2. Provision the MPT-HLS co-channel XPIC configuration
3. Provision MPT-HLS 1+0 Horizontal XPIC Configuration:
4. Provision MPT-HLS 1+0 Vertical XPIC Configuration:
g. To
Provision the MPT-HLS manual transmit power level
step 38.
h. To
Provision the spare MPT-HLS
i. To
Provision the MPT-HLS Automatic Transmit Power Control
to step 43.
j. To
Provision the spare MPT-HLS
k. To
Provision the MPT-HLS radio protection
l. To
Provision the MPT-HLS link
m. To
Provision the MPT-HLS Synchronization Status
step 56.
n. To
Provision the MPT-HLS Point to Point Protocol
o. To
Provision the PKT throughput booster
p. To
Administer the MPT-HLS Alarm Profile
q. To
Provision the MPT-HLS radio channel
r. To
Administer the RX squelch
Open the appropriate radio main view click on the Settings tab; see
i. Provision 1+0 Horizontal radio channel. See step
to provision radio channel parameters.
ii. From the Option drop-down menu, choose gain configuration (Std/XPIC.
iii. Click Apply.
iv. Provision Horizontal radio channel XPIC Configuration Polarization to
Horizontal.
v. Click Apply.
i. Provision 1+0 Vertical radio channel. Provision the Vertical radio channel
using the following radio parameters identical to the values provisioned for
the horizontal radio channel (step
• Mode
• Reference Channel Spacing
• Modulation
• Shifter
• TX Freq
Configure radio parameters
RTPC, go to step 41.
ATPC, go to step 46.
scheme, go to step 48.
identifier, go to step 54.
Messaging, go to
settings, go to step 58.
setting, go to step 59.
settings, go to step 61.
encryption, go to step 65.
settings, go to step 68.
29
or
3
i).
(RTPC), go to
(ATPC), go
Figure
627.
32
for detailed steps
827
Advertisement
Table of Contents
