Figure 302 Easv2 Enabled - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
Enable equipment
Figure 302 EASv2 enabled
5. Verify port segregation provisioning. Port segregation should be provisioned
To enable an MPT-HL or MPT-HLC transceiver card on P8ETH or EASv2 card
1. Select the slot where the card is equipped to support MPT-HL/MPT-HLC
2. Click the Settings Tab in the resource detail area. See
486
between the EASv2 Ethernet ports and other Ethernet and/or radio ports where
connectivity is not desirable. See
detailed steps to view/provision port segregation.
Transceiver in the resource tree area. The selected name will highlight in blue.
This selection also highlights the card in blue on the graphical representation of
the MSS shelf in the resource list area.
WebEML User Manual
Provision port segregation/connectivity
Figure
for
303.