Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
7. From the Connections tab, verify the SDH_RING cross-connection was entered
To provision an SDH to LAG Cross connection
1. Verify port segregation provisioning. Port segregation should be provisioned
Figure 203
SDH to LAG configuration dialog
2. On the STM-1_RADIO LAG pop-up, verify the Flow Id to be cross connected.
correctly.
between parallel radio paths at both ends when they exist on the NE. Also port
segregation should be provisioned between the radio port and other Ethernet
and/or radio ports where connectivity is not desirable. See
segregation/connectivity
Select SDH port and drag to draw line to an L1 LAG on an EASv2 card.
SDH-RADIO LAG pop-up displays. See
for detailed steps to view/provision port segregation.
Figure
203.
Provision cross connections
Provision port
369