Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
Open and run performance monitoring
To run PM on an L1 radio LAG port
1. From the resource tree area, select the Ethernet Statistics pane.
2. From the Ethernet Statistics pane, select the L1 radio LAG to on which to run
3. To configure the Ethernet counters for an L1 radio LAG with EASv2, choose
986
Note: Measured throughput on an L1 LAG includes both TDM2TDM/TDM2ETH/
SDH2SDH data flow and Ethernet traffic.
radio Ethernet PM.
TDM+ETHERNET or ETHERNET from the Aggregation Type drop-down menu
in the Configuration panel.
Figure 737
shows the configuration.
WebEML User Manual
Advertisement
Table of Contents
