Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
Configure radio parameters
Figure 600
MPT-HL 1+1 settings tab
13. Provision the MPT-HL 1+1 spare radio channel:
Note: The Channel #1 Rx Freq (KHz) field displays the Rx RF Frequency and is the result
of the following calculation:
RX Frequency = TX Frequency +/- Shifter Frequency (based on the high or low channel
selected)
14. Select an action.
796
i. Enter the TX Frequency within the allowed range.
The Rx Freq (KHz) field displays the Rx RF Frequency.
ii. Click Apply.
a. To
Provision the MPT-HL manual transmit power level
step 16.
WebEML User Manual
(RTPC), go to
Advertisement
Table of Contents
