Release 7.0.0 3DB 19286 ACAA Issue 01
Provision protection scheme parameters
Figure 580
Equipment Protection Scheme Parameter tab
2. Select Equipment Protection in the resource tree area.
Note: For 1+1 HSB/SD protection type, EPS restoration criteria is always dimmed. The
restoration criteria selected for HSB protection is applied to EPS automatically.
3. From the Restoration Criteria partition, verify restoration criteria selection and
To provision the Hot StandBy Protection Schemes parameter
1. Select Protection Schemes/HSB Protection in the resource tree area.
768
provision if required:
a. Select restoration criteria radio button, Not Revertive or Revertive.
b. Click Apply.
The HSB Protection Scheme Parameters tab displays in the main window. See
Figure
581.
WebEML User Manual