Figure 272 Provision Sdhacc Oc-3 Port - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 272 Provision SDHACC OC-3 port
b
a
e
g
h
j
l
6. Provision OC-3 port using the following procedure:
Note: When provisioning OC-3 ports for 1+1 EPS Protection, provision the main ports. Then
only enable the spare ports. Then re-provision 1+1 EPS protection.
Note: It is not possible to enable a port while 1+1 EPS protection is enabled. To enable an
OC-3 port after 1+1 EPS protection is provisioned, the operator must disable 1+1 EPS
protection. Enable the new port. Then re-provision 1+1 EPS protection.
See Figure 272 for the following steps:
a. Select the Settings tab.
The Settings tab displays.
b. Select Port#s.n to provision: Port#s.1 or Port#s.2.
Provision equipment port
c
d i
f
k
n
m
23063
453