Figure 414 Node J To Node D (Protected): Pdh-Ring Cross-Connection On Node D - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 414 Node J to Node D (protected): PDH-Ring cross-connection on Node D
To provision a cross-connection between Node K and Node B
1. One traffic end point belongs to the fiber chain, see
a. Choose the flow IDs to cross-connect from the Available VLANs list
b. Choose the Service profile: TDM2TDM or TDM2ETH
c. Choose the Clock Source, if the Service profile is TDM2ETH
d. Enter the Ring Destination MAC address: Node A Unicast MAC address
Provision cross connections in a mixed fiber/
Figure
microwave Ring
415.
605