Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
41 Administer L1/L2 radio and L2 Ethernet
41.1 Purpose
This chapter provides detailed procedures to provision and administer L1/L2 Radio
and L2 Ethernet LAG ports.
Note: Some graphics may not match the current release.
Note: All procedures are shown using the MSS-8 screen, however, the operation is similar
for all MSS shelves.
41.2 General
L1/L2 Radio and L2 Ethernet LAG port provisioning is performed using the craft
terminal.
Ethernet and Radio ports must be configured prior to provisioning LAG ports.
If the NE is in Provider Bridge mode, the LAG port can be assigned a Provider Bridge
port type and added to an S-VLAN.
For a detailed description of LAG, including port membership rules, see the
9500 MPR Product Information Manual.
41.2.1 Provider bridge parameters
If the NE is in Provider Bridge mode, LAG ports can be configured as NNI, UNI (port-
based) or UNI (VLAN-based). Parameters apply for each port type:
NNI - S-VLAN TPID
LAG ports
Administer L1/L2 radio and L2 Ethernet LAG
ports
305