Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
50 Deprovision equipment ports
50.1 Purpose
This chapter provides procedures to deprovision equipment ports.
Note: All procedures are shown using the MSS-8 screen, however, the operation is similar
for all MSS shelves.
The Core graphics in this chapter show the Core-E card. The procedure is similar for a
CorEvo card.
50.2 Prerequisites
Cross-connections associated with the equipment port must be disabled prior to
deprovisioning the equipment port.
50.3 Procedures
This section provides the following procedures:
To deprovision a Core SFP port
1. Select MSS/Core-Main slot #1/2 in the resource tree area. The selected name
2. Click the Settings Tab in the resource detail area. See
•
To deprovision a Core SFP port
•
To deprovision a P8ETH or EASv2 card SFP port
•
To deprovision an E1/DS1 P32E1DS1 port
•
To deprovision a DS3 P2E3DS3 port
•
To deprovision an SDH port
will highlight in blue. This selection also highlights the MSS/Core card in blue on
the graphical representation of the MSS shelf in the resource list area.
Deprovision equipment ports
Figure
276.
459